The casing for the power supply to the wooden head has cracked. This was pulled apart completely on the crack, and glued back at the same time as gluing the casing onto the power unit transformer.
Here it is being held temporarily in the vice, while a cramp is attached.
A conical casing for the %v end of the power lead had been turned, which had also cracked. This turned out to be helpful, as it was the easiest way to fit the plug
A pair of locking grips was used as a cramp to hold it while the glue set.
Once glued and cramped, they were let to dry
Here is the finished mains end of the plug (face side)
Here is the business end of the finished mains end of the plug.
The transformer is held in place firmly using hot glue
And finally the finished end of the 5v plug
No comments:
Post a Comment